THE PERFECT INSULATION SYSTEM FOR ALL BUILDINGS
Insulation Plaster
 Heat Insulation |
Water Insulation |
Fire Protection |
|
Sound Insulation |
Breathable |
Antibakteriyel |
|
|
Light |
Stabil Insulation Value |
|
Economic |
|
 Texture Compatibility and Long Life |
Insulation Plaster – Interior
A ready-mixed facade insulation plaster containing Portland cement, expanded silicates and inorganic fillers. It is modified with additives, which are not harmful to health and environment, according to European filler directives and ISO requirements. It fulfils WATERPROOF, HEAT, SOUND and FIRE insulation conditions.
| Technical Specifications | Explanation |
| Packing | 50 L/Bag(±%2) |
| Appearance | White Powder |
| Application Temperature | -5°C +40°C |
| Application Thickness | 10 mm – 50 mm |
| Application Time | 45 minutes |
| Method of Application | Steel Trowel – Pump |
| First Drying | 1 hour |
| Setting Time | 72 hours |
| Fire Response Class | A1 |
| Theoretical Powder Consumption | 14-16 L/m²/cm |
| Dry Density | 240 Kg/m³ |
| Thermal Conductivity | 0,047 W/mK |
| Compressive Strength | CSII (2,2 N/mm²) |
| Water vapor permeability | 8 |
| Capillary Water Absorption | W1 |
| Adhesion Strength | 3,2 Kgf/cm |
| Sound Insulation (2cm Thickness) | 22 db/500 Hz. |
| Fire Prevention (2cm) | F120 / 120 minutes |
USAGE AREAS
It is used directly on the interior walls of the buildings, columns and beams, on rough and fine plaster, brick, pumice bloc. Primer, must be used necessarily on concrete, gas concrete and painted surfaces. It fulfils WATERPROOF, HEAT, SOUND and FIRE insulation conditions.
SURFACE PREPARATION
Blistered paint and spaced plasters are scraped off the surface. 4-5 notches per 10 cm² press on painted surfaces. The application surface should be cleaned from dust. Priming must be done on painted surfaces.
APPLICATION
Laths that determine the thickness are adhered to the prepared surfaces. Between two laths, is filled with a steel trowel or plasterer trowel and gauged. Following the first dry (~ 1-2 hours later ), the slats are removed from the surface and the spaces are filled and the pattern is drawn. if is dry when touched, (12-24 hours later) decorative plaster is drawn. No foreign matter should be added to the prepared mixture. (Lime, Plaster, Cement, etc.)
APPLICATION DETAILS
In manual application, it should be mixed with ~ 8-10 liters of water with low speed (400-600 rev/min) drill for 3-4 minutes. In machine application, it should be pumped to the surface by mixing with 8-10 liters of water in average. When the desired thickness is reached, it should be allowed to dry.
APPLICATION CONDITIONS
Application surface and ambient temperature should be above -5°C. Considering excessive moisture loss at temperatures above 40°C, mixing water should be increased and the surface should be kept moist by wetting for 1 day after the surface hardening phase.
ISSUES TO BE CONSIDERED
Avoid application under strong wind or sun. The time increases at low temperatures and the time decreases at high temperatures. It should not be applied on frozen, melting or freezing surfaces within 24 hours. Appropriate plaster mesh should be used at different material junctions and points where movement may be considered.
STORAGE TRANSPORT
Protect from frost, rain and other weather conditions. 70 Bags in 1 pallet is 3.500 L.
ENVIRONMENTAL IMPACTS
Not classified as dangerous.